Y-4 TRAPEZOID PLATE MOLD

MOLD SIZE: 29 CM

The dimensions written in the mold information section are the measurements from the outside to the inside. The dimensions of the product that will come out of the mold vary depending on the shrinkage of the clay. Therefore, a milliliter value cannot be given. Calculate the dimensions of the product that will come out according to the shrinkage value of the clay you use.
The drying time of the product in the mold varies depending on the ambient temperature and the thickness of the clay poured. You should pour according to the desired thickness. The casting time also varies depending on the type of clay you use.
Our molds are suitable for casting ceramic or porcelain clay. Before casting, you should clean the mold of dust. You should wipe the mold with a damp cloth or sponge. You should mix the clay thoroughly before casting.

You should sift it if necessary.
The clay should be poured slowly into the mold and filled to the pouring opening of the mold.
Newly produced molds may have a risk of remaining damp; if the mold is damp, wait 2-3 days before using it.